Letou nhà cái đánh giá

A Library to Ease Accessing Flash-based (PROGMEM) Data

A Library to Ease Accessing Flash-based (PROGMEM) Data

Email:  Subscribe:  Arduino wisdom and gems by Mikal Hart Flash.
A Library to Ease Accessing Flash-based (PROGMEM) Data.
Storing static program data in flash/PROGMEM is a tricky part of Arduino programming.
To save precious RAM, a novice user already at odds with unfamiliar C++ syntax must digest such daunting concepts as prog_char, PSTR(), PROGMEM, pgm_read_word(), etc.
Even seasoned users get tripped up by the indirection and typecasting that are required to retrieve valid PROGMEM data.
Add to that a couple of apparent bugs in the implementation, and it’s clear that PROGMEM is a complicated mess.
I have written a new library, Flash, which abstracts away most of this complexity.
It provides new String, Array, Table, and String Array types that make ROM-based data collections as easy to use as “normal” types.
Each overrides the C++ [] operator, so to extract individual elements one uses familiar array access syntax: // float array example float t = temperatures[950]; // (2D) font table example digitalWrite(pin[i], font_table[”a”][i]); // string example for (int i=0; iYou should rename the folder “Flash”

because the IDE doesn’t like dashes in the name.
Creating named Flash objects.
To create a Flash object, you use a library-provided macro.
Each of the four basic types provides its own creation macro: Strings: FLASH_STRING(name, value) Arrays: FLASH_ARRAY(type, name, list of values…) Tables: FLASH_TABLE(type, name, columns, values…) String Arrays: FLASH_STRING_ARRAY(name, values…) Examples: FLASH_STRING(big_string, “Moreover, as you might appreciate, ” “their implications were such as to provoke a certain ” “degree of sorrow within me.
Indeed – why should I not ” “admit it.
– at that moment, my heart was breaking.”); FLASH_ARRAY(float, temperatures, 23.1, 23.1, 23.2, 23.2, 23.4, 23.7, 25.0, 26.0, 26.8, 28.8, 30.2, 31.9, 33.1, 33.1, 33.2, 33.2, 33.4, 33.7, 35.0, 36.0, 36.8, 38.8, 40.2, 41.9); FLASH_TABLE(boolean, font_table, 7, {0,0,0,0,0,0,0}, {0,0,0,1,0,1,1}, {1,0,1,1,1,0,1}, {1,1,0,0,0,0,0}, {0,1,0,1,0,1,0}, {1,0,1,1,1,0,1}, {1,0,0,1,0,0,1}, {0,0,1,1,0,1,1}, {1,0,1,1,1,1,1}); FLASH_STRING_ARRAY(digits, PSTR(“Zero”), PSTR(“One”), PSTR(“Two”), PSTR(“Three”), PSTR(“Four”), PSTR(“Five”), PSTR(“Six”), PSTR(“Seven”), PSTR(“Eight”), PSTR(“Nine”)); [Note that you can make Arrays and Tables out of any native type.] [Note also that the String Array is a slightly special case.
For technical reasons, as you can see in the example, each member of the array initializer must be wrapped with the PSTR() operator.
For this reason, String Arrays cannot be declared at global scope, but must be non-statically defined within in the body of a function.
Note also that while the individual strings in a String Array are contained in PROGMEM space, the array itself (again, for technical reasons) is RAM-based, consuming 2 bytes per array element.

This limitation does not apply to the other Flash types.] Using named Flash objects

Array-like access.

Each Flash type provides an [] operator to get access to the underlying data

for example: // extract an element from an Array float t = temperatures[5]; // examine characters in a String for (int i=0; i if (big_string[i] == ”O”) ++big_O_counter; // Use a font table to configure a 7-segment display for (int i=0; i digitalWrite(pins[i], font_table[1][i]); // Examine the sizes of strings in a String Array for (int i=0; i Serial.println(digits[i].length()); Since Tables are really just two-dimensional arrays, the Table object’s implementation of [] returns a one-dimensional Array object.
Size.
Each Flash type provides a mechanism for determining its size: String and String Array: size_t length(); Array: size_t count(); Table: size_t rows(); size_t cols(); Access.
If you need it, each Flash object provides an access() method that returns the underlying PROGMEM pointer Print compatibility.
Each Flash object has a print() method that can be used to serialize the object to any stream derived from core class Print (HardwareSerial, NewSoftSerial, LiquidCrystal, Ethernet, PString, .

Etc.) See “Printing Flash objects” below

String copy.
Flash String objects may be copied in whole or part to RAM using the String object’s copy method: // copies the first 10 characters of the big_string char temp[11]; big_string.copy(temp, 10); Printing Flash objects.

Each Flash object can “print” itself

using either its print method directly: temperatures.print(Serial); big_string.print(lcd); font_table.print(softserial); or, equivalently, by using the << streaming operator: Serial << temperatures; lcd << big_string; softserial << font_table; You can retrieve the version of the Flash library by inspecting FLASH_LIBRARY_VERSION. int ver = FLASH_LIBRARY_VERSION; The latest version of Flash is available here: Flash5.zip moved some code to a new .cpp file to avoid inlining every member function. fixed a bug in the copy() method. Thanks to forum user Bill W. (“westfw”) for testing Flash and observing that Strings take up a surprising amount of extra PROGMEM space (20 bytes per string). I used his data to modify the library so that some of the commonly used functions, notably the _FLASH_STRING constructor are not inlined. This change reduces the footprint of the example programs noticeably. Thanks, Bill. I appreciate any suggestions or input. Page last updated on January 30, 2014 at 9:41 pm 252 Responses → “Flash” « Older Comments @Karl, Thanks. Next rev will definitely have this. @Olx, Yep, .

But this isn’t a problem with Flash

You can’t Serial.println() a type that Serial.println() doesn’t know.
You’d get the same error with Serial.println(t);.
You could create a global or class variable of type _FLASH_STRING_ARRAY * and set it like this: _FLASH_STRING_ARRAY *parray; parray = &pips;.
@Hans, I would use the onboard EEPROM to store incoming telephone numbers.

You can’t really use Flash for that kind of thing

Read up on Arduino+EEPROM.
@Passcal, I’m afraid I don’t know of any F() bugs.
dimitryous On install “Flash” I got the following message: ‘Warning: class ch.randelshofer.quaqua.osx.
OSXFile can’t use library quaqua64.
It has version 4 instead of 5′.
Running Arduino 1.0.5 on MacOS 10.9.1 3.7GHz Intel QuadCore i16 Hope this will help….
@dimitryous, .

I don’t think that message has anything to do with Flash

In any case, it doesn’t mean anything to me.
Sorry.
C W Rose On compiling the Flash-5 library I get: /usr/share/arduino-1.0.5/libraries/Flash/Flash.h:60:0: warning: “F” redefined /usr/share/arduino-1.0.5/hardware/arduino/cores/arduino/WString.h:38:0: note: this is the location of the previous definition The obvious answer is to rename the F() macro to FL(), but I’m not sure of the further effects.
Do you have any suggestions.
(It might also be useful to warn people of the avr-libc 1.8 problems with prog_char, and the need for “-Wno-deprecated-declarations -D__PROG_TYPES_COMPAT__” when compiling older code.
Will.
@C W Rose, Hmm.
That definition is guarded with an #if ARDUINO < 100. It shouldn’t compile on Arduino 1.0.5. Is there something peculiar about your configuration. C W Rose Right, I hadn’t noticed that. ARDUINO must be undefined, for some reason. I’ll check it out. Will. charles is the library working with arduino due. thanks charles. Hi Charles– No, it doesn’t work on Due. I hadn’t thought to port it because the Due has so much RAM already, but I ought to make it at least compile correctly… :). Haulier I cant run this programm when i put FLASH into my librarie i have a erreur when compilation for using flash : In file included from flash_streaming.pde:21:0: /root/sketchbook/libraries/Flash/Flash.h:70:23: error: ‘prog_char’ does not name a type _FLASH_STRING(const prog_char *arr); ^ …. @Haulier, What Arduino board have you selected.

Flash only works on AVR (Atmel) boards

The Raven Why does this sketch not work.
It will only recall one variable.
FLASH_ARRAY(int, analog_values, 1022, 1024, 836, 844, 926, 934, 558, 566, 692, 700); void setup() { Serial.begin(9600); int x = analog_values[0]; int y = analog_values[1]; Serial.println(x); Serial.println(y); } void loop() { }.
gr1ff1n Hi, I am using your Flash and Streaming library for a project and have encountered a problem with Flash.
I am using it to store a large look-up table.
But when I search it for a certain value and try to read two positions into local variables, the second reading is wrong.
Instead I get two times the same value (first reading).
Only workaround is to add delay(.) or delayMicroseconds(.) in between the readings.
The exact delay doesn’t matter (delayMicroseconds(1) will do just fine.
The thing is, that I search the table in a loop and the compare function does always find the correct position.
The problem only occurs when I read values within a row :/ Is there any new information about this bug.
Liss Great library, however when compiling I get some warnings: http://www.pasteall.org/52721/text I fixed most of them, here is the patch: http://www.pasteall.org/52722/text With above patch, only one warning left, about “size == -1″ comparison in Flash.h.
I’m not sure how to fix it because I do not understand how it was supposed to work in the first place if “size” declared as “size_t” (which is unsigned).
Brad Hmm, I’m using TinyWebServer, which is in turn using Flash.

You mentioned above that Flash won’t work on Due – I’m using Teensy3.1

which is also ARM rather than AVR based and Flash throws compile errors like: In file included from WebServerSD.ino:10:0: C:\Users\X\Arduino\libraries\Flash/Flash.h: In member function ‘char* _FLASH_STRING::copy(char*, size_t, size_t) const’: C:\Users\X\Arduino\libraries\Flash/Flash.h:78:37: error: operands to ?: have different types ‘char*’ and ‘int’ Just in case you decided to look into it, here’s the lines pointed to from the error: /* _FLASH_STRING class.
Use the FLASH_STRING() macro to create these, or use inline F() macro.
*/ class _FLASH_STRING : public _Printable { public: _FLASH_STRING(const prog_char *arr); size_t length() const { return strlen_P(_arr); } char *copy(char *to, size_t size = -1, size_t offset = 0) const { return size == -1.
Error Line–>> strcpy_P(to, _arr + offset) : strncpy_P(to, _arr + offset, size); } const prog_char *access() const { return _arr; } const _Printable &Printable() const { return *this; } char operator[](int index) const { return static_cast(pgm_read_byte(_arr + index)); } void print(Print &stream) const; private: const prog_char *_arr; };.
@Liss, Thanks.
The comparison to -1 is me basically comparing with the largest possible size_t.
It should probably be “size = (size_t)-1″.
Try replacing the body of copy: char *copy(char *to, size_t size = -1, size_t offset = 0) const { if (size == -1) strcpy_P(to, _arr + offset); else strncpy_P(to, _arr + offset, size); return to; }.
Eule Hi Mikal Great library, I have been using it a lot.
I just got a Arduino YUN which means I have to use Arduino IDE 1.5.7 and get following compile error: error: ‘prog_char’ does not name a type _FLASH_STRING(const prog_char *arr); The YUN has ATmega32U4 which I would have thought should work with the Flash library.
Any suggestions.
Regards.
Darren Lind I noticed that your library comes up with a few warnings when compiled, I think Ive fixed them.
The ‘prog_char’ data type has been depreciated, I believe it can be replaced with ‘char’ in your .h and .c files You have this in your .h file char *copy(char *to, size_t size = -1, size_t offset = 0) ‘size_t’ is an unsigned data type, so when you test it in the return statement it spits out a warning I changed the default to 0 as you wouldnt copy something of 0 size, this code seems to work but not sure if will always work.
char *copy(char *to, size_t size = 0, size_t offset = 0) const { return size == 0.
strcpy_P(to, _arr + offset) : strncpy_P(to, _arr + offset, size); }.
Elftek Hi, I love this library and we use it extensively and today after we upgraded to arduino ide 1.0.6 we are getting this error.

/…/libraries/Flash/Flash.h: In member function ‘char* _FLASH_STRING::copy(char*

size_t, size_t) const’: /…/libraries/Flash/Flash.h:78:37: error: operands to ?: have different types ‘char*’ and ‘int’ Can you help fix this error so it would work with 1.0.6.
thanks in advance Mikal.
@Elftek, I’ll take a look and get back to you….
KiSwiSje I don’t understand exactly what the availableMemory function is trying to prove … I use this to check available ram: on an uno – sketch returns 1023 1842 // source http://www.gammon.com.au/forum/?id=12615 int freeRam () { return (RAMEND – size_t (__malloc_heap_start)); } void setup () { Serial.begin (57600); Serial.println (availableMemory()); Serial.println (freeRam ()); } void loop () { } int availableMemory() { int size = 1024; byte *buf; while ((buf = (byte *) malloc(–size)) == NULL); free(buf); return size; }.
@KiSwiSje, I believe you have a bug in your availableMemory() routine.
Remove the semicolon at the end of while ((buf = (byte *) malloc(–size)) == NULL).
Ty Tower Example does not compile on 1.5.8 with this message –how do I fix that.
In file included from flash_example.pde:21:0: /opt/arduino-1.5.8/libraries/Flash/Flash.h:70:23: error: ‘prog_char’ does not name a type _FLASH_STRING(const prog_char *arr); ^ /opt/arduino-1.5.8/libraries/Flash/Flash.h:70:34: error: ISO C++ forbids declaration of ‘arr’ with no type [-fpermissive] _FLASH_STRING(const prog_char *arr);.
@Ty, Later versions of the compiler don’t support the “prog_char” keyword.
I think you can just change it to “char” and it will work.
I’ll eventually do this myself.
Rob hi… I’m Trying to use Flash Library with Arduino 1.5.8 and i’m getting this Error… C:\Users\LabTab\Documents\Arduino\libraries\Flash-5/Flash.h: In member function ‘char* _FLASH_STRING::copy(char*, size_t, size_t) const’: C:\Users\LabTab\Documents\Arduino\libraries\Flash-5/Flash.h:86:34: error: c in this scope strncpy_P(to, _arr + offset, size); I would be glad to know the solution for this one., I really need it ASAP., the library seems to work just fine with the older versions of arduino IDE’s but with 1.5.8, I can’t make it work., thanks in advance….
Philipp Masmeier Dear Mikal, thanks for this Lib, which I use extensivly in programs, where I use many tables.
They’re usually filled with uint8_t-Values, so only one Byte per Entry.
I defined one FLASH_TABLE with uint16_t but this doesn’t work.
Is this a general issue or did I something other wrong.
Below I have copied the declaration.
Thanks and best regards, Philipp FLASH_TABLE(uint16_t, Signaladressen, 7, {200, 105, 0, 105, 1, 104, 1}, {201, 109, 0, 109, 1, 9999, 9}, {202, 107, 0, 9999, 9, 107, 1}, {203, 155, 0, 155, 1, 156, 0}, {204, 146, 0, 146, 1, 9999, 9}, {205, 147, 0, 9999, 9, 147, 1}, {206, 145, 0, 9999, 9, 145, 1}, {207, 207, 0, 207, 1, 9999, 9}, {208, 208, 0, 208, 1, 9999, 9});.
@Philipp Masmeier: What problem are you having.
I copied your code and added Serial.println(Signaladressen[3][3]); … and it printed 155 as expected.
Ovidiu Predescu Mikal, I was able to compile version 5 of your library using the following lines added after the avr/pgmspace.h is included: #if ARDUINO >= 150 typedef char prog_char __attribute__((__progmem__)); #endif Hope this helps.
@Ovidiu– very helpful, thank you much.
mike hi, i am using ide 1.6.4 and nothing happened.
it just said “compiling”, but the bar didnt move… i changed #if ARDUINO >= 150 typedef char prog_char __attribute__((__progmem__)); #endif like Ovidiu suggested, not its working.
yours, mike.
Ovidiu Predescu Mikal, here’s another fix for version 5 of your library to make it work on the new Cortex M0-based boards.
Again, this needs to be added after the avr/pgmspace.h is included.
Tested on the official 1.6.7.
#if ARDUINO_ARCH_SAMD extern char* strncpy_P(char* dest, const char* src, int size); #endif.
Bruce Vernham Is it possible to pass a”FLASH_ARRAY” to a function.
charles @Ovidiu Is it possible to compile for due also.
Ivan is there any way to use the this library to pass values to a function.
this is my string: FLASH_STRING(gfm_atcgatt,”AcfCGATT?\”,\”OK\”,\”yy\”,20000,2″); this is my function thay using a lot of memory myfunction(“heremyfirstparameterverylong”,”heremysecondparameterverylong)” how to transform it.
myfunction(gfm_atcgatt,…)” help please….
@Ivan, yep, the underlying type is _FLASH_STRING, so you if want to pass that to your function use: void myfunction(_FLASH_STRING &str) { }.
Imagenes De Flores Silvestres Conseguirás unas rosas que conservaran su color y aroma.
« Older Comments 12 Trackbacks For This Post New Flash library « Arduiniana → March 24th, 2009 → 9:59 am [.
] Interested to learn more.
Read all about it here.
[.
].
vkick Blog Site » Blog Archive » How to do Timer and Save Settings.
→ June 18th, 2009 → 4:01 pm [.
] http://arduiniana.org/libraries/Flash/ Categories: Arduino Posted By: Mon Last Edit: 18 Jun 2009 @ 04 01 PM Email • Permalink Previous  Responses to this post » (None)  Post a Comment Click here to cancel reply.
[.
].
→ July 1st, 2010 → 2:38 pm [.
] third party libraries were used; PString to handle parsing the incoming website, Flash for memory management, and Streaming for easier coding.
[.
].
Blog What I Made » YAHMS: Base Station → May 14th, 2011 → 8:08 am [.
] interface, see the links below for that too.
You’ll also need NewSoftSerial of course and the Flash library which I’ve used to decrease memory usage.
Follow the instructions in [.
].
Arduino – Steuern per Internet | bastianmueller – blog → September 19th, 2012 → 12:58 pm [.
] Steckdose (An/Aus) hängt sich der Ardu komplett auf.
Ihr benötigt zusätzlich die Bibliothek Flash (für das Speichern im Flash statt SRAM) und FreeMemory (für die Anzeige des freien [.
].
Single Machine Sun Tracking / Heliostat Electronics Set Up – CerebralMeltdown.com → August 16th, 2013 → 3:18 pm [.
] Also, make sure you download and install the flash.h library before trying to upload this program.
Here is the link. http://arduiniana.org/libraries/flash/ [.
].
Arduino – Steuern per Internet | 3bm.
blog.
→ September 14th, 2013 → 5:30 am [.
] Steckdose (An/Aus) hängt sich der Ardu komplett auf.
Ihr benötigt zusätzlich die Bibliothek Flash (für das Speichern im Flash statt SRAM) und FreeMemory (für die Anzeige des freien [.
].
Blog J.
Schweiss | Design Patterns with Arduino → February 24th, 2014 → 12:14 pm [.
] http://arduiniana.org/libraries/flash/ Tags: Categories: Actions: E-mail | Kick it.
| Permalink | Kommentare (0) | Comment RSS Ähnliche BeiträgeAVR Studio and the Arduino core libraryHowTo  Forum and there Arduino-Addin Project Announcing – Arduino Tutorial Refe…Arduino Libs Interactive Arduino BASIC interpreter: – An Interactive Arduino BASIC interpreter that runs on th…Arduino Tipps               http://www.kriwane.
Über den Author.
Net, Silverlight, Tools & more Search Tagscmdlet-list Filesystem Key NGEN PWM SnapShot SQL SQLServer SP2 Temperature-Measurement Tipps & Tricks USB Thermometer Windows Firewall Archiv2014Februar (13)Januar (30)2013Dezember (44)November (24)Oktober (19)September (36)August (26)Juli (14)Juni (35)Mai (40)April (26)März (19)Februar (29)Januar (27)2012Dezember (35)November (36)Oktober (44)September (45)August (50)Juli (28)Juni (22)Mai (32)April (28)März (18)Februar (11)Januar (39)2011Dezember (41)November (37)Oktober (39)September (74)August (22)Juli (42)Juni (34)Mai (35)April (89)März (92)Februar (42)Januar (34)2010Dezember (13) Weitere SeitenTool ÜbersichtUtilities Blogroll Al NyveldtRazorAnt Software acqui…RazorPDF SamplesTalking MonoTouch at Ph… Download OPML file RecentPostsDesign Patterns with ArduinoC# XML SerializerCOMArduino C++ optional arguments in functionsArduino with TPLink RouterIIS app pools, worker processes, app domainsOpenWRT ForumOpenWRT on Linksys RouterLinioRepRap [.
].

Haskins Arduino Fans | Flash | Arduiniana → March 30th

2014 → 8:23 pm [.
] Flash | Arduiniana.
[.
].
Ipfone2 » RELÓGIO ROLANTE COM MATRIZ 5X7 E RTC DS1307 → November 30th, 2014 → 5:10 am [.
] é que o comando PROGMEM é bem complicado e após pesquisar um pouco encontrei o seguinte link: Library to Ease Accessing Flash-based (PROGMEM) Data com uma biblioteca que facilita muito o uso do [.
].
Accessing Arduino Program Memory | WoodUino.ca → February 7th, 2015 → 2:12 pm [.
] there are libraries of functions (Mikal Hart’s FLASH library, for one) to simplify the use of storing and reading data in the program memory, I like to [.
].
Memoria Arduino | Aprendiendo Arduino → September 5th, 2017 → 12:28 am [.
] Ver librería Flash que facilita el uso de PROGMEM: http://arduiniana.org/libraries/flash/ [.
].
Click here to cancel reply.
Leave a Reply.
© 2020 Mikal Hart.


Leave a Reply