Unzipping files in Powershell scripts
Category : Khuyến Mại
Unzipping files in Powershell scripts.
I’ve been working for some time on a project which is deploying a complex application to a client’s servers.
This project relies on Powershell scripts to push zip files to servers
unzip those files on the servers and then install the MSI files contained within them.
The zip files are frequently large (up to 900MB) and the time taken to unzip the files is causing problems with our automated installation software (Tivoli) due to timeouts.
The scripts are currently unzipped using the Copyhere method
Simple tests on a Windows 8 PC with 8GB RAM and an 8 core processor although a single SATA hard drive show that this method is “disk intensive” and disk utilisation as viewed in Task Manager “flatlines” at 100% during the extraction.
I spent some time looking at alternatives to the “Copyhere” method to unzip files to reduce the time taken for deployments and reduce the risk of Tivoli timeouts which were affecting the project.
Method A series of test files were produced using a test utility (FSTFIL
FSTFIL creates test files made up of random data
These files are difficult to compress due to the fact that they contain little or no “whitespace” or repeating characters, similar to the already compressed MSI files which make up our deployment packages.
Files were created that were 100MB, 200MB, 300MB, 400MB and 500MB.
Each of these files were zipped into similar sized ZIP files
As well as this a single large ZIP files containing each of the test files was also created.
Tests were performed to establish the time taken to decompress increasingly large ZIP files.
Test were performed to establish whether alternative decompression (unzip) techniques were faster.
Observations The effect of filesize on CopyHere unzips Despite initial observations
after averaging out the time taken to decompress different sized files using the CopyHere method the time taken to decompress increasingly larger files was found to be linear.
The difference between CopyHere and ExtractToDirectory unzips To do this comparison
two PowerShell scripts were written.
Each script unzipped the same file (a 1.5GB ZIP file containing each of the 100MB
200MB, 300MB, 400MB and 500MB test files described earlier).
Each script calculated the elapsed time for each extract, this was recorded for analysis.
Unzips took place alternately using one of the two techniques to ensure that resource utilisation on the test PC was comparable for each test.
No detailed performance monitoring was carried out during the first tests, but both CPU and disk utilisation was observed to be higher (seen in Task Manager) when using the CopyHere method.
Conclusion The ExtractToDirectory method introduced in.
Net Framework 4.5 is considerably more efficient when UNZIPPING packages
Assuming that this method is not available, alternative techniques to unzip the packages, possibly including the use of “self extracting .exe” files, the use of RAM disks or memory-mapped files to remove disk bottlenecks or more modern decompression techniques may reduce the risk of Tivoli timeouts and increase the likelihood of successful deployments.
Powershell scripts used November 18
2013November 18, 2013 , , Powershell, , 2 Comments on Unzipping files in Powershell scripts DMA2200 Media Center problem – resolved.
For the last few weeks, .
I’ve been having problems with my Linksys Media Extender
This has been causing me a great deal of grief because this is the only method currently of watching TV in bed (I have a Windows 7 Media Center PC in the front room and serve recorded TV as well as the satellite feeds up to the extender in the bedroom).
I’ve noticed that occasionally the Media Center Extender freezes up and becomes unresponsive to the remote control.
I replaced the batteries in the remote (twice) but the problem remained.
The Extender would happily continue displaying the channel that I had started watching but wouldn’t allow me to change.
Occasionally I’d come back to the Extender to find that the screen was blank and the extender was unresponsive.
Restarting the Extender has always temporarily resolved this issue, but in the last few days, the problem has become more acute and the extender has generally only remained stable for a few minutes before crashing again.
Since nobody is manufacturing extenders any more (until Ceton releases their new media center later this year) , this could have meant that I needed to drop an aerial into the bedroom and lose the ability to watch recorded TV.
Trawling the Internet for clues to the problem I came across this article, which although it was 2 years old and written in the US, gave me a nugget of information which fixed my problem.
http://experts.windows.com/frms/windows_entertainment_and_connected_home/f/116/p/95097/496301.aspx (Sadly not there anymore….) It appears that the extender tries to connect to a Cisco or Linksys server to obtain an update.
Since support for this product has now been withdrawn it is likely that the server is now offline.
My theory is that the problem hit US users a few years ago and perhaps only recently has the same problem surfaced in my region when the UK/European regional servers were decommissioned.
My connection was wired, but I presume that the same steps could be used to fix a problem with a wired DMA2200 (or DMA2100) extender.
Steps taken: Set a static IP address for the media center extender.
Enter 0.0.0.0 for both primary and secondary DNS servers.
This prevents the extender from accessing the internet and then crashing when it fails to find the relevant update servers.
August 18, 2012October 8, 2019 , Media Center, 2 Comments on DMA2200 Media Center problem – resolved.